BSPP / BSPTBRITISH STANDARDPIPE PARALLEL / BRITISHSTANDARD PIPE TAPER55 Degree ThreadsSIZETPIMAJOR (EXT) mmMINOR (INT) mmTAP DRILL (mm)1/8"289.7288.5668.701/4"1913.15711.44511.603/8"1916.66214.95015.001/2"1420.95518.63119.005/8"1422.91120.58720.753/4"1426.44124.11724.507/8"1430.20127.8...

Consists of a cylinder barrel, piston, piston rod, both end caps, friction wearing, O-ring. It uses the pressure of compressed air to perform work, especially linear work. A port at one end of the cylinder supplies compressed air to one side of the piston, causing it and the piston rod to move. The ...

Pneumatic mufflers are used for valves, cylinders and pneumatic tools and systems to reduce the noise. In Europe, pneumatic mufflers are also called pneumatic silencers. In the USA, people also called it pneumatic breathers. They are used to reduce the exhaust noise, also called exhaust mufflers, ve...

There are two main types of polyurethane: polyester and polyether. Both are highly effective in a diverse range of industries. Polyester urethane and polyether urethane are elastomers, meaning that they possess elastic properties, and both offer unique performance properties. What are the main diffe...

1. Parallel cylinder pay attention to keep distance The distance between the two parallel cylinders must be more than 40mm, otherwise the magnetic switch of the two cylinders will be interfered with each other and cause misoperation. 2. Magnetic switch wiring as short as possible The wiring le...

Pneumatic is the abbreviation of "pneumatic technology" or "pneumatic transmission and control". Pneumatic technology uses air compressor as the power source and compressed air as the working medium. Pneumatic technology uses the pressure and flow of compressed air for energy transmission or signal ...